Usually UV-A is used to cure UV adhesives, UV inks, or UV coating. The most common UV-A wavelength for curing UV materials is LW370 (peaks at about 368 nm), however, for some adhesives LW350 (peaks at about 352 nm) will work just as will. The exact UV wavelength might need to be determined to see if a LW350 lamp (bulb) could be used.

(Click image to enlarge)
SuperBright II model 3351 without cover or filter

For small jobs where an area much less than four square feet (3716 sq. cm.) needs to be cured the hand held SuperBright II model 3351 without its cover and filter can be used. The (1) SuperBright II model 3351 without cover and filter and the standard LL-16-351 (LW350) lamp can be special ordered. And the (2) SuperBright II model 3368 without its cover and filter and the LL-16-368 lamp (LW370) can also be special ordered.

For larger jobs that involve high speed UV curing or areas larger than four square feet the TripleBright II model WOCLL52 with the LL-60-352 (LW350) lamp can be used.

The LL-60-368 (LW370) lamp can also be substituted in the same TripleBright II. That model number would be WOCLL68 (not on the web site) and the cost would be the same.

For any questions contact Don Newsome, President.